2 separate questions

Discuss general Sibelius issues here. Get help with Sibelius and Sibelius Support.
marcm54
Posts: 6
Joined: Sat Dec 09, 2017 12:19 pm
Sibelius Version: 7
Operating System: Windows

Post by marcm54 » Sat Dec 09, 2017 12:23 pm

Hello everyone,
Please forgive my poor English, i am french, and i use a translator ...

I kill two birds.
2 separate questions.
1 / I have 2 litters, a cello 1 and a cello 2, I want to bring them together. I saw advice on this forum about this topic, the answer is logical and is the one I used, but it does not work!
So track 1 I assign voice 1 to the first vc, track 2 I assign voice 2 to the 2nd staff. I take the latter, I copy it, I stick on the scope of the top and it sticks instead, not merging the two voices. What to do ?

2 / With Sibelius we can either print the whole orchestral score, or the instruments separately, but if I want to print for example 2 singers and the piano, without any other instrument, but on the other hand, these 3 together ... I did not find how?
Thanks for your help
Mark


MikeLyons
Posts: 1631
Joined: Fri Jun 24, 2016 7:20 pm
Sibelius Version: Ult. 2024.3.1/7.5
Operating System: Windows

Post by MikeLyons » Sun Dec 10, 2017 8:42 am

For your first question, select the 2nd cello and press [alt]2 followed by [ctrl/cmd][shift][alt]2. (This should set all notes to voice 2 and then select only the notes and rests and text etc, but not the measures)
Then press [ctrl/cmd]c (copy) and select the first bar of the first cello and press [ctrl/cmd]v (paste). This should add the voice 2 notes to the existing music.

For the second question:
Create a new part (Parts--> New part) which contains the instruments you need (singer 1, singer 2, piano). Treat it as any other part.

Pour votre première question, sélectionnez le 2e violoncelle et appuyez sur [alt] 2 suivi de [ctrl / cmd] [shift] [alt] 2. (Cela devrait définir toutes les notes à la voix 2, puis sélectionnez uniquement les notes et les silences et le texte etc, mais pas les mesures)
Puis appuyez sur [ctrl / cmd] c (copier) et sélectionnez la première mesure du premier violoncelle et appuyez sur [ctrl / cmd] v (paste). Cela devrait ajouter la voix 2 notes à la musique existante.

Pour la deuxième question:
Créez une nouvelle partie (Partie -> Nouvelle partie) qui contient les instruments dont vous avez besoin (chanteur 1, chanteur 2, piano). Traitez-le comme toute autre partie.
Sib 6.2, 7.5 and 2023.6, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 3.3.2, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk

marcm54
Posts: 6
Joined: Sat Dec 09, 2017 12:19 pm
Sibelius Version: 7
Operating System: Windows

Post by marcm54 » Sun Dec 10, 2017 9:18 am

Thank you very much Mike, it is all working as you explain to me.

At least i have one question more.
If i want to add a piano on the general score, to extract part with only piano and singers, like you said (with the new part from the score), it's easy to add instrument, but if i want to print all the score (without Piano) for the conductor, i have to make a new part with every instrument but without the piano ?

So i have to make always 2 scores : One piano+ Singers. Other one with all without Piano. (if 27 tune to make, it'll takes a long time that way)

Thank's for your answers
Marc

MikeLyons
Posts: 1631
Joined: Fri Jun 24, 2016 7:20 pm
Sibelius Version: Ult. 2024.3.1/7.5
Operating System: Windows

Post by MikeLyons » Tue Dec 12, 2017 4:30 pm

Marc, you do not need to have two scores. Create a part with only the instruments you want to see on it. This part will update if you make changes to the score and will not be visible unless you have the part open. I will PM you with an example score.
Sib 6.2, 7.5 and 2023.6, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 3.3.2, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk

marcm54
Posts: 6
Joined: Sat Dec 09, 2017 12:19 pm
Sibelius Version: 7
Operating System: Windows

Post by marcm54 » Tue Dec 12, 2017 6:32 pm

Ok Thank's Mike, but in my MP i see only file CVS or XML and when i load them : there are my questions ...
By the way, i'll try to make Kontakt 5 as midi player, it see it but it let it in grey. I can't click on Kontakt .
I select the Dll 64 ...
Do you know something about that ?

MikeLyons
Posts: 1631
Joined: Fri Jun 24, 2016 7:20 pm
Sibelius Version: Ult. 2024.3.1/7.5
Operating System: Windows

Post by MikeLyons » Tue Dec 12, 2017 10:58 pm

OK. Let me have your email address and I'll email it.

I gave up on Kontakt years ago. The best sounds for me are NotePerformer. If you have to use Kontakt, then Kontakt 5 is the best version I know of for Sibelius. even so, it is clunky! (Ça ne marche pas bien)
Sib 6.2, 7.5 and 2023.6, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 3.3.2, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk

marcm54
Posts: 6
Joined: Sat Dec 09, 2017 12:19 pm
Sibelius Version: 7
Operating System: Windows

Post by marcm54 » Wed Dec 13, 2017 7:29 am


MikeLyons
Posts: 1631
Joined: Fri Jun 24, 2016 7:20 pm
Sibelius Version: Ult. 2024.3.1/7.5
Operating System: Windows

Post by MikeLyons » Wed Dec 13, 2017 8:05 am

Sent! :-D
Sib 6.2, 7.5 and 2023.6, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 3.3.2, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk

Post Reply