Hi.
I added some ossia staffs for variations when the section repeats.
So, I set the original staff to play on 1st pass and mute on 2nd. That works ok
I set the ossia staff to mute on 1st pass and play on 2nd, but that doesn't. It mutes on both.
Any ideas? Thank you
No playback from ossia staff
You would really need to let us see the actual file, not a pic of part of it. There are so many variables.
Sib 6.2, 7.5 and 2024.3.1, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 4, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk
Sorry! Here it is: (it seems I can't attach it directly)
https://drive.google.com/file/d/1vCe7gZ ... sp=sharing
https://drive.google.com/file/d/1vCe7gZ ... sp=sharing
OK, I think I've sussed it.
The ossia staff in the repeat bar does not have a return to Soprano sax, so it is still "no instrument hidden" which has no sound id. This seems to turn off playback on the repeat. If you do one of the following:
Instead of just relying on the ossia, select it from after the bar with notes into the 1st time bar and change instrument to "no instrument (hidden)" this will place a change back to saxophone.
Or, with the existing music, select the last bar of the hidden instrument and insert an instrument change to soprano/Alto/etc sax in the last bar. You will have to move it to the end of the system (until the end repeat barline disappears from the ossia staff and the staff itself goes back to being invisible. I have done the sop sax one for you. You'll probably also need to use optimize to get the staves back where they were.
You can post sib files if you zip them first like this one.
The ossia staff in the repeat bar does not have a return to Soprano sax, so it is still "no instrument hidden" which has no sound id. This seems to turn off playback on the repeat. If you do one of the following:
Instead of just relying on the ossia, select it from after the bar with notes into the 1st time bar and change instrument to "no instrument (hidden)" this will place a change back to saxophone.
Or, with the existing music, select the last bar of the hidden instrument and insert an instrument change to soprano/Alto/etc sax in the last bar. You will have to move it to the end of the system (until the end repeat barline disappears from the ossia staff and the staff itself goes back to being invisible. I have done the sop sax one for you. You'll probably also need to use optimize to get the staves back where they were.
You can post sib files if you zip them first like this one.
Sib 6.2, 7.5 and 2024.3.1, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 4, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk