IAC Bus Configuration Active Devices Problem.

Discussion of playback and midi issues go here.
matthewablack
Posts: 1
Joined: Mon Dec 12, 2022 9:03 pm
Sibelius Version: 2022.10
Operating System: Mac

Post by matthewablack » Mon Dec 12, 2022 9:16 pm

Somewhere between update 2022.7 and now (I'm on the current version) Sibelius has stopped saving my IAC busses as active devices in my configurations. When I create a new configuration and save it the program works as usual. When I close the software and reopen the IAC's have been removed from the Active Devices are but show in the available devices. When I readd them I'm back to normal. This is quite a pain in the arse as I'm dealing with full wind templates using 10-15 IAC busses at a time.

Here's what I've tried:
1) Saving as a new configuration
2) Creating a new Configuration from scratch with IAC's
3) Starting a new Sibelius file and going through the same process.
4) Yes I restarted my computer, yes I updated to the most recent software.
5) I'm using loopback and UA console... not that it should matter, but could be relevant for debugging.
Some other helpful tidbits- I'm using Ableton, Logic, or Mainstage with this. My preferences in all are set to receive IAC messages but not return any to sibelius (to not create a midi feedback loop).


https://youtu.be/MizRNguisGo


andyg
Posts: 1727
Joined: Tue Feb 14, 2006 8:55 pm
Sibelius Version: 7.1.3 and 6.2
Operating System: Windows

Post by andyg » Tue Dec 13, 2022 9:00 am

I'd ask this on the official Sibelius site, rather than this old unofficial one. Only 3 of us answering questions and I can't help!

https://www.sibelius.com/cgi-bin/helpce ... ?groupid=3

Post Reply