Add notes without erasing previous notes???
-
- Posts: 43
- Joined: Sat Nov 12, 2011 8:08 pm
- Sibelius Version: 8.5
How can I add new notes into a staff, without erasing previous notes that are already present???
Is there an EASY SIMPLE way to do this???
Does Sibelius have some feature (key command) that will lock currently present notes from being overwritten???
So many things that should be simple obvious features are SO FRUSTRATINGLY difficult to achieve in Sibelius unless one jumps thru 5 or 6 ridiculous work-around steps or goes searching for some stupid plugin!!! In my opinion Sibelius needs a major upgrade!!
Is there an EASY SIMPLE way to do this???
Does Sibelius have some feature (key command) that will lock currently present notes from being overwritten???
So many things that should be simple obvious features are SO FRUSTRATINGLY difficult to achieve in Sibelius unless one jumps thru 5 or 6 ridiculous work-around steps or goes searching for some stupid plugin!!! In my opinion Sibelius needs a major upgrade!!
Sibelius 8.5, iMac (Retina 5K, 27-inch, Late 2015) | i7 4.0GHZ | 32GB Ram | SSD 512HD | 4MB AMD Radeon R9 M395X GPU | OS 10.12.4 (Sierra)
-
- Posts: 43
- Joined: Tue Dec 06, 2011 1:46 am
If you do not want to overwrite what is currently on the staff, use a different voice. That can tend to get a little messy at times and you may want to consider just using an additional staff. Best of luck!!!
-----------------------------------------
p.s. One of the greatest powers of Sibelius is the diverse body of plugins available. Check out www.themusictranscriber.com/store.php for some fun ones. If you engrave, arrange, compose, or publish for a living you might wanna check out the new Plugin Bundles, http://themusictranscriber.com/PublisherBundle.html
-----------------------------------------
p.s. One of the greatest powers of Sibelius is the diverse body of plugins available. Check out www.themusictranscriber.com/store.php for some fun ones. If you engrave, arrange, compose, or publish for a living you might wanna check out the new Plugin Bundles, http://themusictranscriber.com/PublisherBundle.html
The Music Transcriber
www.themusictranscriber.com
@musictranscribe
www.themusictranscriber.com
@musictranscribe
-
- Posts: 43
- Joined: Sat Nov 12, 2011 8:08 pm
- Sibelius Version: 8.5
I've already tried using different voices, and the previous voice still gets erased when inputting notes into other voice.
Sibelius makes difficult so MANY things that should be SIMPLE tasks to accomplish!!!
Sibelius makes difficult so MANY things that should be SIMPLE tasks to accomplish!!!
Sibelius 8.5, iMac (Retina 5K, 27-inch, Late 2015) | i7 4.0GHZ | 32GB Ram | SSD 512HD | 4MB AMD Radeon R9 M395X GPU | OS 10.12.4 (Sierra)
Are you asking for an 'insert' mode, where inputting new notes moves existing notes along? If so, there isn't one and never has been.
If not, and you're sayng that adding notes in one voice erases existing voices in another, no it simply doesn't do that, so you're doing something wrong somewhere.
What are these many things that Sibelius makes difficult? We may be able to help you if you tell us!
If not, and you're sayng that adding notes in one voice erases existing voices in another, no it simply doesn't do that, so you're doing something wrong somewhere.
What are these many things that Sibelius makes difficult? We may be able to help you if you tell us!
-
- Posts: 43
- Joined: Sat Nov 12, 2011 8:08 pm
- Sibelius Version: 8.5
Treble staff example:
1) I add notes to voice 1,
2) on the keypad, I think select 2 (for voice 2)
3) I think click/select the rest that was created for voice 2,
4) I hit record and proceed to play via my midi-keyboard new notes that I want to appear in voice 2.
As the recording goes along the new notes that are suppose to be ONLY for voice 2, are erasing all the current notes that I previously input for voice 1. How can I "LOCK" the notes in voice 1 so they are NOT overwritten by the new notes I am inputting into Sibelius via my midi-keyboard???
1) I add notes to voice 1,
2) on the keypad, I think select 2 (for voice 2)
3) I think click/select the rest that was created for voice 2,
4) I hit record and proceed to play via my midi-keyboard new notes that I want to appear in voice 2.
As the recording goes along the new notes that are suppose to be ONLY for voice 2, are erasing all the current notes that I previously input for voice 1. How can I "LOCK" the notes in voice 1 so they are NOT overwritten by the new notes I am inputting into Sibelius via my midi-keyboard???
andyg wrote:Are you asking for an 'insert' mode, where inputting new notes moves existing notes along? If so, there isn't one and never has been.
If not, and you're sayng that adding notes in one voice erases existing voices in another, no it simply doesn't do that, so you're doing something wrong somewhere.
What are these many things that Sibelius makes difficult? We may be able to help you if you tell us!
Sibelius 8.5, iMac (Retina 5K, 27-inch, Late 2015) | i7 4.0GHZ | 32GB Ram | SSD 512HD | 4MB AMD Radeon R9 M395X GPU | OS 10.12.4 (Sierra)
Which keypad? On screen or a real one.
In any case 2 is not the key to use. It's either Alt-2 (on a PC anyway) using the usual number keys, or click the 2 on the very bottom row of the on screen keypad. Note entry cursor will turn green at this point. Don't forget to go back to Voice 1 when you've finished.
From this and your other post, it's clear that you don't yet understand how Sibelius works. Are you perhaps moving across from another app that let you do these things? I always hate to just say 'Read the Manual', but going through the tutorials/blogs etc would certainly help.
Take this in the kind manner that it's intended!
In any case 2 is not the key to use. It's either Alt-2 (on a PC anyway) using the usual number keys, or click the 2 on the very bottom row of the on screen keypad. Note entry cursor will turn green at this point. Don't forget to go back to Voice 1 when you've finished.
From this and your other post, it's clear that you don't yet understand how Sibelius works. Are you perhaps moving across from another app that let you do these things? I always hate to just say 'Read the Manual', but going through the tutorials/blogs etc would certainly help.
Take this in the kind manner that it's intended!
I think I understand his difficulty, that is just the same as mine.
Let's say I wrote a sequency of notes in a measure, than i decided to transform those notes into chords (like writing in blocks) and just want to write addicional notes. When I click above or bellow the existing note, that previous note is erased and I have to write the new and the previous note again.
Complicated?
anyway...
How do I do that without erasing the previous note, and also not having to select the 2nd voice?
Thanks!
Let's say I wrote a sequency of notes in a measure, than i decided to transform those notes into chords (like writing in blocks) and just want to write addicional notes. When I click above or bellow the existing note, that previous note is erased and I have to write the new and the previous note again.
Complicated?
anyway...
How do I do that without erasing the previous note, and also not having to select the 2nd voice?
Thanks!
No, not complicated at all. You just need to learn how to input notes in Sibelius.
You make chords by inputting or selecting a note and then typing the interval of the note(s) you want to add. So selecting C and pressing 3,3 would add E and G above (and allowing for any sharps/flats in the key sig). If you use Shift plus the number, it will add the intervals below the selected note. You can select a whole series of notes and add chord notes to them if you wish.
You make chords by inputting or selecting a note and then typing the interval of the note(s) you want to add. So selecting C and pressing 3,3 would add E and G above (and allowing for any sharps/flats in the key sig). If you use Shift plus the number, it will add the intervals below the selected note. You can select a whole series of notes and add chord notes to them if you wish.
I think this is what the original poster is trying to ask (which is, incidentally, what I'd like to do) -
Is it possible to copy and paste 1 line of music onto a stave which has an existing line already?
For example, I have a trumpet part and a saxophone part that are in harmony with each other but as I am trying to make a condensed score I want to put them both together on the same stave, for say, piano, to make them into 2 note chords.
Yes, I know, you can achieve this with voice 1 and 2 (filter note only, copy, select bar to paste into, click "voice 2" on num pad, paste) but it comes out looking unreadable (bottom note stem up, top note stem down, notes not aligned, other dumb stuff)
I don't know how to do it either, sorry. But maybe this clarifies the question? It seems people don't quite know what the original poster is asking.
Is it possible to copy and paste 1 line of music onto a stave which has an existing line already?
For example, I have a trumpet part and a saxophone part that are in harmony with each other but as I am trying to make a condensed score I want to put them both together on the same stave, for say, piano, to make them into 2 note chords.
Yes, I know, you can achieve this with voice 1 and 2 (filter note only, copy, select bar to paste into, click "voice 2" on num pad, paste) but it comes out looking unreadable (bottom note stem up, top note stem down, notes not aligned, other dumb stuff)
I don't know how to do it either, sorry. But maybe this clarifies the question? It seems people don't quite know what the original poster is asking.
Here's the Trick:
You CAN"T select the "SOURCE" measure itself (blue highlight) and copy it to the clipboard, and then paste it into a different measure (Target Measure) THAT ALREADY CONTAINS NOTES because the existing notes will be overwritten by the paste command.
The trick is to select the notes you want to copy in the SOURCE MEASURE using Control-Left Click.
Then select your Target Measure (blue highlight), and click on Voice 2 (at bottom of Keypad)
Then you're ready: Control-V to paste the source notes into the target measure WITHOUT deleting the existing notes in the measure.
Practice this a few times to nail home the technique.
It works!
You CAN"T select the "SOURCE" measure itself (blue highlight) and copy it to the clipboard, and then paste it into a different measure (Target Measure) THAT ALREADY CONTAINS NOTES because the existing notes will be overwritten by the paste command.
The trick is to select the notes you want to copy in the SOURCE MEASURE using Control-Left Click.
Then select your Target Measure (blue highlight), and click on Voice 2 (at bottom of Keypad)
Then you're ready: Control-V to paste the source notes into the target measure WITHOUT deleting the existing notes in the measure.
Practice this a few times to nail home the technique.
It works!
Here's a thought in Sib 7 and higher:
Select the bars you want to copy
[ctrl][shift][alt]1 (top row of main keyboard)
[ctrl]c
Select target bar
Home-->Paste-->Paste into voice (use voice 2 for safety)
Done.
Select the bars you want to copy
[ctrl][shift][alt]1 (top row of main keyboard)
[ctrl]c
Select target bar
Home-->Paste-->Paste into voice (use voice 2 for safety)
Done.
Sib 6.2, 7.5 and 2024.3.1, Windows 11, 32GB RAM, 16TB 7200RPM Storage, 2TB SSD, Note Performer 4, EWQLSO, EWQLSC, Harmony Assistant and some others. mike@mike-lyons.co.uk