Sibelius Forum Store | Buy Sheet Music

Best way to write brass parts in Sibelius

Sibelius beginners can discuss all things Sibelius here ("how do I...?").

Best way to write brass parts in Sibelius

Postby JoffreyR » Sun May 12, 2019 7:50 am

Hi all,

I am currently writing an orchestral score into Sibelius.

My main issue is about Horns,flutes, trumpets etc... All the staves where in a conductor score the parts are grouped.

For exemple, regarding horns, I want to create a conductor score with horns grouped per 2 (one staff for Horn 1 & 2 and one for horns 3 & 4) as it is usual in a conductor score.

So what is the best way to put this done in Sibelius.

Do I have to create 4 staves, one for each horn and then there is a magic way to group everything together. Or do I need to use the multiple voices feature. But last time I have done that, I couldn't extract separate parts for Horn 1 and 2 when I want to print them.

Thanks a lot for your help
JoffreyR
 
Posts: 1
Joined: Sun May 12, 2019 7:37 am

Re: Best way to write brass parts in Sibelius

by Sponsor

Forum Sponsor
 

Re: Best way to write brass parts in Sibelius

Postby MikeLyons » Sun May 12, 2019 2:21 pm

Hi,

I tried to give you step-by-step instructions, but this stupid board seems to have decided I'm a spammer. If you let me have you email address, or contact me at mike@mike-lyons.co.uk I will send them to you.

Yours,

Mike Lyons
Sib 6.2, 7.5 and 2019.1, Windows 10, 8MB RAM, 7TB 7200RPM Storage, Note Performer 2, EWQLSO, EWQLSC, Harmony Assistant and some others.
MikeLyons
 
Posts: 505
Joined: Fri Jun 24, 2016 7:20 pm

Re: Best way to write brass parts in Sibelius

Postby MikeLyons » Mon May 13, 2019 3:38 pm

OK. My Bad If there's no f in SHIFT that's bad! ;-)

If you will eventually need separate parts, you WILL need separate (but hidden) staves in the score.
For four horns, you will need to create 6 staves. Separate staves for the parts and a bracketed pair for horns 1&2 and 3&4. Do the main input on the joined staves, using voice 1 for the 1st/3rd horn and voice 2 for the 2nd/4th horn. make sure all the editing is done before you copy the music onto the separate staves. (Don't forget to mute these extra staves in the mixer).

Select Horn 1&2 - Triple click
Filter for voice 1 ([ctrl][shift][alt]1
Copy - [ctrl]c
Paste into the first bar of horn 1
Triple click the Horn 1 &2 staff again. Filter for voice 2 [ctrl][shift][alt]2
{ctrl]c
Select the first bar of Horn 2
Paste into Voice 1 (Home-->Paste-->Paste into voice)

Repeat for horns 3&4.

If you don't have sib 7 or later instructions will be different.

M
Sib 6.2, 7.5 and 2019.1, Windows 10, 8MB RAM, 7TB 7200RPM Storage, Note Performer 2, EWQLSO, EWQLSC, Harmony Assistant and some others.
MikeLyons
 
Posts: 505
Joined: Fri Jun 24, 2016 7:20 pm

Re: Best way to write brass parts in Sibelius

Postby andyg » Mon May 13, 2019 4:35 pm

Mike - you've beatn me to the explanation, but please read your first sentence out loud at normal speed - it's even worse! :D
andyg
 
Posts: 1392
Joined: Tue Feb 14, 2006 8:55 pm
Location: UK

Re: Best way to write brass parts in Sibelius

Postby MikeLyons » Mon May 13, 2019 10:22 pm

Ah, Andy, THAT was intentional! Cunning wordsmith that I am! :-D
Sib 6.2, 7.5 and 2019.1, Windows 10, 8MB RAM, 7TB 7200RPM Storage, Note Performer 2, EWQLSO, EWQLSC, Harmony Assistant and some others.
MikeLyons
 
Posts: 505
Joined: Fri Jun 24, 2016 7:20 pm



Similar topics


Return to Beginners

Who is online

Users browsing this forum: Google [Bot] and 8 guests


Music Engravers and Music Copyists
   Finale - Sibelius - Cakewalk - Archives - Sibelius Books - Links - Contact


Copyright © 1994 - 2019 by C.M. Press, LLC